Waspaloy Alloy
W. Nr. 2.4654
Applications
Gas Turbine Components, Seals, Springs, Fasteners
Description
Waspaloy is a nickel-based, age hardenable superalloy with great strength at temperatures up to 1600°F. The alloy’s chemistry allows for age hardening that surpasses the performance of alloy 718 for demanding, high temperature applications. Waspaloy can withstand combustion environments due to excellent resistance to relaxation at elevated temperatures, combined with appreciable oxidation resistance. The alloy also maintains considerable resistance to fatigue in these applications.
Industries Supplied
Military and Commercial Aerospace, Land-Based Gas Turbines, Automotive
Nominal Composition
C: 0.02 – 0.10
Mn: 1.0 max
Si: 0.75 max
P: 0.030 max
S: 0.030 max
Cr: 18.0 – 21.0
Co: 12.00 – 15.00
Mo: 3.50 – 5.00
Fe: 2.00 max
Al: 1.20 – 1.60
Ti: 2.75 – 3.25
B: 0.003 – 0.01
Zr: 0.02 – 0.12
Cu: 0.50 max
Ni: 58 Bal min
Physical Properties
Density: 0.296 lb/in3, (8.19 g/cm3)
Modulus of Elasticity (E):
At 70°F (20°C): 30.9 x 103 ksi (213 GPa)
Coefficient of Expansion:
7.7 µin/in-°F (70-1000°F)
14.3 µm/m-°C (20-600°C)
Electrical Resistivity: 0.37 µohm-ft, (1.20 µohm-m)
Thermal Conductivity: 125 Btu-in/ft2-hr-°F (1000°F), 19.1 W/m-°C (600°C)
Applicable Specifications
Wire & Bar: AMS 5706, AMS 5707, AMS 5708, AMS 5709, AMS 5828,
Typical Mechanical Properties
- Annealed
- Heat Treatment: 1825-1975°F (995-1080°C)
Or per specifications - Tensile Strength: 160 ksi max
- Suggested Operating Conditions: -300 to 1600°F (-184°C to 871°C)
- Heat Treatment: 1825-1975°F (995-1080°C)
- Annealed + Aged
- Heat Treatment: Stabilization 1550°F (845°C)
Age 1400°F (760°C)
Or per specifications - Tensile Strength: 160 ksi min
- Suggested Operating Conditions: Up to 1020°F (549°C)
Low stress up to 1400°F (760°C)
- Heat Treatment: Stabilization 1550°F (845°C)
- Spring Temper
- Heat Treatment: None
- Tensile Strength: 200 ksi min
- Suggested Operating Conditions: Up to 1020°F (549°C)
Low stress up to 1400°F (760°C)
For further information Contact:
Contact Us
Phone: 1 847 695 1900
Elgiloy Specialty Metals – Wire Products
356 N.Cross Street
Sycamore, IL 60178 USA
Limitation of Liability and Disclaimer of Warranty:
• The content in these data sheets is provided primarily by third-party melting mills and is provided for reference only. It is not intended for engineering or design.
• Applications may be discussed, however, Elgiloy Specialty Metals, a Division of Combined Metals Company LLC, does not recommend or endorse any material for any particular end use or application.
• The data included in this data sheet are typical values and may vary.
• Elgiloy Specialty Metals, a Division of Combined Metals Company LLC, makes no representations or warranties, express or implied, as to the accuracy, completeness, condition, suitability, performance, fitness for a particular purpose, or merchantability of any information contained in any data sheet.
• In no event will Elgiloy Specialty Metals, a Division of Combined Metals Company LLC, be liable for any damages whatsoever arising from the use of the information included in the data sheets.